China LVDS interface 10.1 inch TFT Manufacturer, Supplier, Factory

The VXT350LQZ-01P is a 3.5-inch 320 x 240 QVGA TFT LCD module with a 4-wire resistive touch panel, and the touch specification is the reason to look at it. Section 6 publishes what almost nothing in this size does: linearity of +/-1.5% after environmental and life testing, terminal resistance per axis, insulation resistance of 20 megohms minimum, response time under 10 ms, light transparency of 78% minimum, operation force of 80 gf typical, surface hardness of 3H minimum, 100,000 pen sliding cycles and 1,000,000 hitting cycles - with the test conditions for each. Two other figures are unusually trustworthy. Brightness carries both a floor and a ceiling, 280 minimum and 420 maximum around the 350 typical, so you can see the production spread as well as the worst case.The viewing angles are the narrowest in our range at 25 degrees typical on one horizontal side and 45 everywhere else, and while the specification states a 6 o'clock viewing direction, it is the horizontal pair that is asymmetric rather than the vertical one - so confirm the orientation with us and expect a narrow cone.

Victronix is a professional TFT module manufacturer and supplier in China. We have been in this field for 18 years and have developed several models. In addition to our standard products, we also offer a customized service to meet our customers' needs. This Victronix 4.3 inch automotive outdoor TFT module is a sturdy 4.3 inch TFT-LCD module designed for challenging automotive and outdoor applications. Combining high-brightness display technology with extended temperature resilience, this module delivers exceptional visual performance in harsh environments. Featuring a 480×RGB×272 resolution with 16.7 million colors within a compact 95.04×53.86 mm active area, it provides crisp visuals with wide viewing angles up to 80° (CR>10) in all directions.

The VXT350MSGV-01 is a 3.45-inch TFT module with 640 x 480 pixels — standard VGA in the classic 4:3 shape — over an active area of 70.08 x 52.56 mm. At 232 PPI it is the highest-density module in this size class, carrying four times the pixels of the 320 x 240 modules that share this identical active area: 307,200 against 76,800. Small text becomes readable, fine graphics render as drawn, and pixels are exactly square at 0.1095 mm so circles need no correction. It runs 24-bit RGB for video and 3-wire SPI for configuration on one 40-pin connector driven by an NV3052C, with DE and SYNC timing charts both provided. Contrast is given as a 600:1 minimum, and viewing angle is 80° in all four directions with viewing direction ALL, so mounting orientation is a mechanical decision only. The backlight is six LEDs in series at just 20 mA — half the current of most modules this size, at 0.36 W. Reliability covers nine tests including vibration, random vibration and 100 G shock.

The CTP-T350GF-08 is a 3.5-inch capacitive touch panel in G+F construction — the only film-sensor panel in our range, and the only one with a six-pin FPC. Its ITO film sensor is 0.125 mm against 0.55 mm for glass, so the stack is thinner and lighter even behind a 1.1 mm cover glass. It reports a single touch point, which suits button and menu interfaces rather than gestures. Rated -20 to +70°C with ±8 kV air-discharge ESD. Built for appliance controls, elevator panels, thermostats and simple HMI.

The CTP-VX121B5563-GG is a 12.1-inch capacitive touch panel in G+G construction with a 1.8 mm cover glass — the thickest in our range, about 1.6 times the usual 1.1 mm — bonded to the sensor with 0.2 mm SCA rather than a foam gasket. That combination is built for unattended and high-abuse installations. Transmittance is at least 85% with ≥6H hardness, and the total stack is 2.7 mm. Suited to industrial HMI, outdoor kiosks, transport terminals and medical equipment.

The VXT101MBAE-01ND is a 10.1-inch TFT LCD module with 1024x600 widescreen resolution and a true 24-bit RGB interface driven by EK79001 and EK73215 controllers. It is the only module in our range with a 12 o'clock viewing direction rather than all-round, so it is built to be read from above and mounted accordingly. A 42-LED backlight and -20 to +70°C operation suit industrial HMIs, control panels, POS and kiosk terminals, and medical carts.