China Small color display Manufacturer, Supplier, Factory

This Victronix Transflective Segment Color VA LCD Module is a sophisticated Color Vertical Alignment (VA) Liquid Crystal Display (LCD) Module, designed for applications requiring high segment count and advanced display capabilities. The module is centrally controlled by the UC2621c LCD driver IC, providing the necessary drive signals and interface management. This LCD module has 1/2D, 1/1B driver mode, and it operates from -30℃to +80℃. For industrial instruments, meters, handheld devices, smart home, bicycle, motor and e-car manufacturers.

This 3.5 inch TFT display VXT350CHH-01P by Victronix is commonly used in Industrial HMIs & Control Panels, Medical Devices, Portable Test Equipment, Automotive Diagnostics, and IoT Edge Devices.

The VX50431-TY036LA is a custom VA type segment LCD display module for products that do not need a TFT. Its white LED backlight runs at 3.0 V and 60 mA — about 0.18 W, four to ten times less than the backlights in our TFT modules — so it runs from a logic rail or a single cell with no boost converter. Brightness is 600 cd/m² with 10:1 contrast. Rated -20 to +70°C and thermal-shock tested to -40 and +85°C.

The CTP-T350GF-08 is a 3.5-inch capacitive touch panel in G+F construction — the only film-sensor panel in our range, and the only one with a six-pin FPC. Its ITO film sensor is 0.125 mm against 0.55 mm for glass, so the stack is thinner and lighter even behind a 1.1 mm cover glass. It reports a single touch point, which suits button and menu interfaces rather than gestures. Rated -20 to +70°C with ±8 kV air-discharge ESD. Built for appliance controls, elevator panels, thermostats and simple HMI.

Where a display can be mounted is usually decided by mechanics, then corrected in software. The Victronix VXT700KWSA-01 removes that second step. Two dedicated pins — L/R on pin 33 and U/D on pin 34 — flip the image horizontally and vertically in hardware, so the same module works upright, upside down, behind a mirror, or viewed through a periscope without touching a line of framebuffer code or paying the performance cost of software rotation. The 7.0-inch 800x480 panel runs on an ST7277 driver over single-channel LVDS on a 40-pin connector, brightness is controlled by a dedicated LED_PWM pin, and STBYB puts the panel into standby for power-sensitive products.

The VXT101BAHA-01C pairs a color TFT LCD with GT928 capacitive touch control. Its dedicated I2C touch connection and LVDS display interface suit embedded designs that bring on-screen controls, equipment readings and status information into one operator panel.